A musty smell that arrives with the cold air, dark spots on registers or a wet air handler closet can all point to mold in the system. EPA advises against running an HVAC system that is contaminated with mold. Call the number on this page to be connected with a local mold company in Rhome.

What does AC mold look like?
- Black, gray or greenish spots on register grilles
- A slimy film on the drain pan or coil fins
- Wet, discolored duct wrap or insulation
- A sour smell right after the system turns on
Seeing one of these usually means moisture is loose somewhere in the equipment.
The condensate line is the usual suspect
Cooling the air pulls water out of it, and that water leaves through a small drain line. Algae slime and debris clog it, the pan fills, and water spills onto insulation and ceilings. Many duct and air handler mold cases in Wise County start with this one blocked pipe.
Homes farther from city services around Rhome often wait longer for an HVAC visit, so a clogged drain line can sit and wet insulation for some time.

Fixing the moisture is part of the job
A cleaning without a fix just resets the clock. Costs can include unclogging or rerouting a drain line, replacing a rusted pan, adding a float switch or sealing and re-wrapping sweating ducts. Ask which of these the quote includes and which belong to an HVAC repair company.
Before anyone starts, ask these questions
- Does the company hold a TDLR mold license, and what is the number?
- Will the system be shut down during the work?
- How will dust be contained?
- Who fixes the water source?
Check the license on TDLR's search.
Keep indoor humidity in check
EPA suggests keeping indoor humidity below about 60 percent, and ideally between 30 and 50. A basic hygrometer from a hardware store shows where you stand. During humid weeks, running bath fans and avoiding long cool-but-clammy cycles can help the whole house stay drier.
Permits and license checks in Rhome
Texas requires a mold license from the Texas Department of Licensing and Regulation (TDLR) to assess or remediate mold for pay once the affected area reaches 25 contiguous square feet. Ask for the license number and run it through TDLR's online search before work begins.
Texas generally doesn't let the same company assess and remediate the same project, so the protocol, the cleanup and the clearance check come from different businesses.
Rebuild work after the mold comes out, such as new drywall or framing, may need a permit; Rhome Permitting Department is the office for Rhome addresses.
Water that came in from outside raises insurance questions; FEMA's flood map search shows whether the property sits in a mapped flood zone.
Calls from Rhome are often matched with companies that also cover Azle, Boyd and Justin.
AC & Duct Mold Removal questions in Rhome
Can mold grow inside AC ducts?
What causes mold in an attic air handler?
Do I need mold testing for my air conditioner?
Does a Texas mold license apply to AC mold?
More mold services in Rhome
AC & Duct Mold Removal nearby
Helpful guides
Sources
Last updated: