EPA says a homeowner can usually clean a mold or mildew area under about 10 square feet. Anything larger, anything that keeps returning and anything on soaked drywall is better handled by a local company. Call the number on this page to be connected with a local mold company in Dallas.

How to Tell If It Is Spreading
Mark the edge of a patch with a pencil or take a dated photo. If it has grown past the line within a week or comes back after cleaning, moisture is still reaching the spot. That is the point where a local company is worth a call.
What a Homeowner Can Usually Handle
EPA says an area under about 10 square feet, on a hard surface, with the water source already fixed, can often be cleaned by the homeowner. Use detergent and water, wear gloves and a mask, and let everything dry thoroughly afterward before you decide the job is done.
Much of the housing in Dallas dates to the 1970s. Older windows, original ductwork and past wall repairs make slow moisture, and the mildew that follows, more common.

Newer Construction, Tighter Houses
Energy-efficient homes seal air in, which helps the AC but traps moisture if ventilation falls short. Rooms that sit closed with the thermostat set low can collect enough dampness for mildew on walls, windows and the backs of closets. A dehumidifier or a short fan run can offset it.
Permits and license checks in Dallas
Texas licenses mold assessment consultants and mold remediation contractors through TDLR. Ask which credential the company holds and confirm it on TDLR's search.
Under TDLR rules, the assessor writes the remediation protocol, the remediator follows it with its own work plan, and a separate assessor handles the post-remediation check.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether Dallas Building Inspection needs to be involved.
If storm runoff or creek water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.
Nearby, the same kind of help is available in Irving, Duncanville and Grand Prairie.
Questions to Ask Before Hiring
Ask for the TDLR license number, how containment works, what happens to removed materials and what the written quote covers. A clear answer to each is a good sign. You can also ask how long drying usually takes and who does the rebuild afterward, if needed.
Outside Matters Too
Gutters that overflow, downspouts that dump at the foundation and sprinklers aimed at siding all keep exterior walls wet. Those walls then feed interior mildew in closets and corners. Redirecting water away from the house helps more than any cleaner can. Check the soil slope near the foundation too.
Around Dallas
Calls come in from across Dallas, including around Oak Cliff, Lakewood, Bishop Arts District.
The Trinity River runs through Dallas and is flanked by earthen levees, and parts of the city sit in its floodplain.
Mold & Mildew Cleanup questions in Dallas
What humidity level prevents mildew?
Can mildew be a sign of a hidden leak?
What should a renter do about mold or mildew?
Which office handles building permits in Dallas?
More mold services in Dallas
Mold & Mildew Cleanup nearby
Helpful guides
Sources
Last updated: