Opening a wall does not have to mean gutting the room. Readings come before cutting, the wet section is removed and dry sections are left alone, so the patching afterward stays modest. Call the number on this page to be connected with a local mold company in Justin.

A quick walk-through before you call
- Check under sinks and behind toilets for dampness.
- Run a hand along exterior walls below windows.
- Look in closets that share a wall with a bathroom.
- Write down where the smell is strongest.
Those notes help the company find the wet area faster.
Cold surfaces and humid air
When the AC runs hard through a long Texas summer and the outdoor air is heavy with moisture, an exterior wall can sweat on the inside, especially behind furniture or a closet packed tight to the wall. Little airflow plus a damp surface is enough for growth, with no leak at all.
Rural properties around Justin often have barns, garages and add-on rooms where slow leaks go unnoticed, feeding hidden growth well away from the main living space.

The leak repair is a separate cost
Removing mold does not fix the pipe, window seal or flashing that fed it. Those repairs usually come from a plumber, window installer or roofer, and many insurers ask for proof that the source was repaired. Handling the source first keeps you from paying for the same wall twice.
What a wall check usually involves
- Questions about past leaks and storm damage
- Moisture meter readings across suspect walls
- A thermal camera scan for cool, damp areas
- A small opening cut at the highest reading
Each step narrows down where the moisture sits, so the removal plan stays as small as the damage allows.
Local details for Justin
TDLR issues separate mold assessment and mold remediation credentials. A two-minute lookup on TDLR's search confirms the company holds the right one for the job you're hiring it to do.
Texas generally doesn't let the same company assess and remediate the same project, so the protocol, the cleanup and the clearance check come from different businesses.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from Justin Building Inspections & Permits.
If storm runoff or creek water got inside, FEMA's flood map service and your insurer can tell you how the address is zoned.
Calls from Justin are often matched with companies that also cover Roanoke, Ponder and Argyle.
Bleach and paint are not the answer
EPA does not generally recommend biocides like bleach for routine cleanup, and a coat of paint only hides the problem for a while. Mold on the back of drywall will not respond to anything applied to the front. Removing wet material and fixing the leak is what works.
Mold in Walls questions in Justin
How can I tell if there is mold inside my wall?
Will they tear out the whole wall?
How long before wet drywall grows mold?
Who closes and paints the wall afterward?
More mold services in Justin
Mold in Walls nearby
Helpful guides
Sources
Last updated: