Finding mold inside a wall starts with moisture, not the paint. A local company scans with a meter and thermal camera, then cuts a small opening where readings run high to see the back of the drywall. Call the number on this page to be connected with a local mold company in Haslet.

Clues and what they can mean
| What you see | What it can mean |
|---|---|
| Bubbling paint | Moisture pushing out from the drywall |
| Swollen baseboard | Water wicking up from the floor edge |
| Musty odor, no stain | Dampness in the cavity |
Readings sort out which applies.
Freeze breaks and hail damage
A hard freeze can split a pipe inside an exterior wall, and the damage only shows after the thaw. Hail that bruises siding, flashing and roof edges opens paths for rain to run down inside the wall. Both are ordinary North Texas events, and wall cavities are where the aftermath hides.
Homes far from city services sometimes include older well houses, sheds and add-on rooms with short roof overhangs, where rain splashes onto the wall base.

Why two quotes can look so different
One company may price only the removal, while another includes drying equipment, containment and repair of the opened wall. Check what each quote covers before comparing. A lower figure that leaves you hiring a second contractor to close up the wall may not be the better deal.
Who handles what in Haslet
TDLR issues separate mold assessment and mold remediation credentials. A two-minute lookup on TDLR's search confirms the company holds the right one for the job you're hiring it to do.
Texas generally doesn't let the same company assess and remediate the same project, so the protocol, the cleanup and the clearance check come from different businesses.
Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether Haslet's Building Permits and Inspections office needs to be involved.
For flood zone questions after a heavy North Texas storm, FEMA's flood maps and your insurance agent can confirm the mapped zone for an address.
Companies that take calls here usually also work in Keller, Roanoke and North Richland Hills.
Removal, drying and the rebuild
Affected drywall and insulation are cut out and bagged, framing is cleaned as needed, and fans or dehumidifiers dry the cavity. Many companies stop there and leave closing and painting to a general contractor, so confirm who handles the rebuild before you sign.
Keeping humidity in check
EPA recommends keeping indoor humidity below about 60 percent, and ideally between 30 and 50. In a North Texas summer that means running the AC regularly, using bathroom exhaust fans and not leaving a closed-up house to sit in the heat. Drier air makes a cavity less welcoming.
Mold in Walls questions in Haslet
Will they tear out the whole wall?
Do I need lab testing for wall mold?
Does bleach work on wall mold?
Do I need a permit to open a wall for mold removal?
More mold services in Haslet
Mold in Walls nearby
Helpful guides
Sources
Last updated: